W: 65" H: 38" D: 39"
Back Height: 21"
Arm Height: 26"
Arm Width: 10"
Inside Seat Dimensions:
W: 45" H: 18" D: 23"
The wooden frame on this collection is composed of beech wood and ash. These woods are selected at source and seasoned for a minimum of 2 years to ensure long term durability. All of the corners and load bearing areas of our frames are additionally secured with heavy duty corner blocks to add to the strength and durability of the frame. Upon completion of the construction of the frame, we encase the entire structure. This process ensures the strength and integrity of the frame. We the put one inch of foam around the frame before upholstery so that when you touch the sides and backs you notice a firm/soft sensation not four inches of play between the leather and frame as you would find with most of our competitors.
We incorporate in our suspension unit; heavy duty nine gauge sinuous spring steel. These "S: shaped steel springs are fastened to the top of the front rail and run from the front to the back of the piece two inches apart. These springs are attached to the frame using heavy duty clips. Two firm rods are used to hold the springs in place which offers additional durability to the sitting area, both on the front and the back of each individual seat. We also attach a canvas barrier between the foam and the steel springs. This does not allow the foam to wear. We use five steel springs per seat to ensure the strength, comfort and durability of the foam cushion core. In addition: we use two solid wooden stretchers that run front to back to stabilize and strengthen the frame against the tension of the steel sinuous springs. This adds to the strength of the frame itself.
Leather: 151 Light Grey with 128 Grey Welt
The leather on this collection is semi aniline. This means that the leather is colored thru and thru and does possess a protective coat of polyurethane on the surface of the leather. This gives the consumer versatility in wear and use; most common household stains can be easily cleaned with a damp cloth and mild soap if addressed within minutes of the spill, spot or stain. This leather color on the Abbey collection is very consistent and has a embossed thick leather grain texture on the surface. The welting is executed in a medium grey leather and really gives the collection and clean, classic casual contemporary look.
Cushions & Seating:
The seat cushions are attached and are composed of polyurethane foam cores with a high quality DACRON topper for comfort. You will find the density of the seat cushions will vary from 2.0 to 2.3. This is a unit of measurement of the number of porous holes in the cushion. The standard quality in our industry would be 1.8. The back cushions are also attached and are composed of Dacron fiber which is blown by computer into vertically and horizontally channeled bags. This ensures that the proper amount of Dacron is blown in the same every time. You will find that each seat cushion comes standard with a POCKETED COIL for long term DURABILITY, COMFORT AND SUPPORT. The seat and back cushions are both fixed.
Sales Features and Benefits of the Abbey Collection:
You will instantly fall in love with the Abbey Collection. The extreme comfort of the high back as well as the lumbar support in the lower back will allow you to sit comfortably for hours. The contrast welting is a classic, retro look and with the combination of two unique gray leathers, as well as the solid wooden black foot, make the collection an instant winner. The soft pillow arm is also added for comfort and softness.